Wholesale Stained Pine 6 Bottle Wine Box

Wholesale stained pine 6-bottle wine box with sliding lid, built for winery direct-to-consumer fulfillment and premium retail display.

Key Features

Sliding lid — no hinges, no hardware, nothing to fail
Kiln-dried stained pine construction — lightweight, takes stain evenly, 10–12% MC
Internal slotted wooden dividers — removable, prevent bottle-to-bottle contact
Cutout side handles — lift a full 6-bottle load safely with two hands
Flat lid surface — ideal for silk screen, laser engraving, or hot branding

Specifications

Wood Type: Solid pine wood
Capacity: Holds 6 standard wine bottles
Dimension: Customizable based on bottle size requirements
Design: Rectangular box with sliding lid and side handles
Surface Finish: Stained brown finish with silk screen printing
Usage: Wine packaging, gifting, storage, and retail display
Customization: Available for size, finish, and logo printing

Applications

Direct-to-consumer winery fulfillment

No hardware to loosen in transit. The sliding lid stays secure through carrier networks — same function on delivery day as it had leaving the fulfillment center.

Retail shelf display

Medium-dark stained pine with silk screen branding reads as premium at a fraction of hardwood cost. Boxes stack cleanly and the lid glides smoothly for in-store handling.

Wine club subscriptions

Identical quality month after month across thousands of units. Removable dividers mean customers keep the box — free ongoing brand exposure.

Customization Options

Dimensions & Bottle Fit. Standard fits six 750ml Bordeaux bottles. We adjust for Burgundy (wider), Riesling (taller/narrower), or any custom bottle shape. The main constraint is material yield — dimensions that maximize boxes per panel sheet keep per-unit cost down.

Wood Species. Pine is standard — lightweight, takes stain well, most cost-effective. Paulownia is lighter but softer. Solid oak or walnut for ultra-premium runs at 2–3× the material cost of pine.

Stain & Finish. Fully customizable — natural, honey, walnut, mahogany, or matched to your brand Pantone. Medium to dark stains hide handling marks better than light finishes. Matte or satin clear coat over the stain for scuff resistance. Custom stain color matching →

Branding Method. Silk screen: lowest per-unit cost, crisp opaque graphics. Laser engraving: permanent textured mark that won't wear off. Hot branding: burns the mark into the wood for a dark, permanent impression.

Interior Configuration. Six individual compartments with slotted wooden dividers. The dividers are not glued — they lift out cleanly if the customer wants to repurpose the box. Standard layout fits six 750ml Bordeaux bottles; we adjust the compartment dimensions for Burgundy, Riesling, or custom bottle shapes.

Ready to get a recommendation?

Send us your requirements — we'll respond with material and production recommendations within 24 hours.

Why This Design Works

The sliding lid has no failure points. Hinges strip screws, bind, and go out of alignment. Latches wear. A sliding lid runs on a track milled directly into the side panels — no hardware, nothing to loosen, works the same on the 100th use as the 1st. For wineries shipping direct to consumers, a lid that glides cleanly and silently is a quality signal the customer feels before they even see the bottles.

Pine isn't a compromise here — it's the right material. Six 750ml bottles weigh 16–18 pounds. Oak or walnut would add 3–5 pounds to the box, driving up shipping costs without improving bottle protection. Kiln-dried pine at 10–12% moisture content is dimensionally stable, takes stain evenly, and a medium-dark walnut stain on pine delivers 90% of the hardwood look at half the material cost.

The slotted dividers are designed to be removed. During shipping they prevent bottle-to-bottle contact — the #1 cause of breakage. But they're not glued in, so the customer can lift them out and repurpose the box for storage or décor. Every time they do, your brand stays visible. That's free marketing built into the joinery.

See our full range of wooden wine crates for wineries, retailers, and corporate gifting.

Manufacturing Considerations

Moisture content controls everything about a sliding-lid box. Pine needs to hit 10–12% MC before the lid tracks are cut. Too wet: the grooves loosen as the wood dries and the lid rattles. Too dry: seasonal humidity swells the wood and the lid binds. For shipments to humid climates, we target the low end of the range and seal the tracks with a moisture-resistant coating.

Track precision makes or breaks a sliding-lid box. A 0.5mm variance in groove width or depth is the difference between a smooth glide and a stuck lid. We check track dimensions on every sample to confirm the fit before production.

Watch out for finish buildup in the sliding tracks. Stain and clear coat can accumulate in the grooves if not applied carefully, narrowing the track and causing the lid to bind. We mask the track interiors before finishing, then apply a thin dry lubricant after the finish cures to keep the slide smooth.

Have a technical concern about your use case? Our team can walk you through how we'd handle it for your project.

Hilon Wood Recommendation

Start with standard pine and a medium-dark walnut stain — it achieves 90% of the hardwood look at half the material cost. Silk screen branding on the lid gives you clean, durable graphics at the lowest per-unit cost. Keep the interior simple — slotted wood dividers do the job. Decorative lining adds cost and production time without improving what customers actually notice about a wine box: the lid action, the stain finish, and the branding.

Start Your Project

Send us your design or reference images — we'll return with a pre-production sample for your approval.

Frequently Asked Questions

How does the sliding lid compare to a hinged lid for wine boxes?

Sliding lids have no failure points — no hinges to strip, no latches to go out of alignment. They travel better through carrier networks because nothing can loosen in transit. Hinged lids create a more ceremonial opening. Choose sliding when shipping reliability matters most; choose hinged when the unboxing experience is part of the value.

Will the pine box hold up during international shipping?

Yes. The sliding lid design actually travels better than hinged alternatives because there are no hardware stress points — nothing to loosen, strip, or go out of alignment. Boxes are individually poly-bagged, packed in export cartons, and palletized with corner protection for container loading.

Can you match a specific stain color to my brand?

Yes. Send a Pantone reference or physical swatch, and we'll match the stain. For large runs, we apply a pre-stain conditioner to minimize grain-driven color variation.

What if my bottles are a non-standard size?

We adjust the internal compartment dimensions to fit your bottles. Send the bottle height, diameter, and taper details, and we'll design the divider layout accordingly. No additional tooling cost — we adjust the CNC program and cutting list for your order.

Can the pine box be repurposed after the wine is gone?

Yes. The internal dividers are slotted, not glued — lift them out and the box becomes general household storage. The stained pine exterior and silk-screened lid look intentional as décor. It's a small design decision that keeps your brand visible long after the original purchase.

Send Us Your Requirements

Send your design, reference images, or product sample. We don't just quote a price — we respond with material recommendations, a feasibility assessment, and professional suggestions grounded in over 20 years of manufacturing experience. Expect a detailed response within 24–48 hours.

Professional recommendations included
Small MOQ & trial orders supported
Worldwide shipping with export documentation